Electric Machine No Clogging High Flow Single Stage Centrifugal Pump
Description:
This pump is our new designer by absorbing advantages of foreign products, the main structure is single-stage, and singe-suction cantilevered structural support. The intake is axial direction suction, as well the output is center upright, which install into seat with motor.
The pump adopt double-pointed ball bearing structure, the front side use lubricating oil, the back side use grease lubricant, between them is oil conductive pipe, to observe the seal condition and recycle heat-conductive oil.
It adopt self heat emanate system, change tradition water cooling system, the structure is simple, small size and economize the power.
Feature:
1. Compact structure, beautiful outline, stable operation, low noise;
2. Both inlet and outlet of this pump are placed under the axial line, so it is unnecessary to remove the inlet and outlet pipeline and motor;
3. The shaft seal of water pump has fine mechanical seal and soft stuffing seal, which can be selected according to different condition by user;
4. The impeller is static-balance calibrated, fixed on the shaft with round nut, and its axial position can be adjusted via the round nut;
5. The pump is direct drove by motor via resilient coupling, it can be drove by internal combustion engine if it is necessary.
Application:
Single Stage Single Suction Centrifugal Pump is used for conveying water or the physical and chemical properties similar to water and other liquids, is transported liquid temperature shall not be higher than 80℃, suitable for factories, mines, urban water supply, power stations, agricultural irrigation and water conservancy.
Product Tags:
|
|
Electric No Clog Performance Water Pump , Single Stage Centrifugal High Flow Pump Images
|
